FMEA LCD Panel Compatibility List
The following table shows which Epson LCD Controllers are compatible with a range of FEMA LCD panels.
Product No. | Size | Resolution | Interface | Epson LCD Controllers | ||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
S1D13513 | S1D13517 | S1D13742 | S1D13748 | S1D13781 | S1D13L01 | S1D13L02 | S1D13L03 | S1D13L04 | ||||
GM240320A-24-TTX2 | 2.4" | 240x320 | 18-bit | OK | OK | OK | OK | OK | OK | OK | OK | OK |
GM240320A-28-TTX2-T | 2.8" | 240x320 | 18-bit | OK | OK | OK | OK | OK | OK | OK | OK | OK |
GM320240DW-35-TTX2NLW | 3.5" | 320x240 | 24-bit | OK | OK | OK(*2) | OK | OK | OK | OK | OK(*2) | OK |
GM640480DW-57-TTX2NLW | 5.7" | 640x480 | 18-bit | OK | OK | OK | OK | OK | OK | OK | OK | OK |
GM800600L-70-TTX2NLW-TP | 7" | 800x600 | 18-bit | OK | OK | - | - | - | - | - | - | OK |
GM1024768DW-80-TIX2NLW-HL | 8" |
1024x768 |
LVDS 18-bit | OK(*1) | - | - | - | - | - | - | - | OK(*1) |
*1 This panel can be used, but requires an external LVDS-Tx chip (e.g. SN75LVDS84A from Texas Instruments) to implement the panel interface.
*2 The output data width of the LCDC is 18-bit. Bits[7:2] of the RGB panel input should be connected to Bits[5:0] of the RGB LCDC output. Bits[1:0] of the RGB panel input should be connected to GND or Bits[5:4] of the LCDC output.
The following documents provide recommended register settings for each compatible Epson LCD Controller. Please use these settings as a guide when configuring the LCD Controller for each specific panel.
S1D13513 Panel Settings Rev 1.5 | 476 KB |
S1D13517 Panel Settings Rev 1.3 | 450 KB |
S1D13742 Panel Settings (same as S1D13L03)Rev 1.3 | 452.5 KB |
S1D13748 Panel Settings (same as S1D13L02)Rev 1.3 | 459.5 KB |
S1D13781 Panel Settings Rev 1.3 | 305 KB |
S1D13L01 Panel Settings Rev 1.3 | 302 KB |
S1D13L02 Panel Settings Rev 1.3 | 459.5 KB |
S1D13L03 Panel Settings Rev 1.3 | 452.5 KB |
S1D13L04 Panel Settings Rev 1.3 | 470 KB |